● Flame signal indicator for multi-color LED signal lights

● The flame signal is displayed by DC 0~10V output signal (display only)

● Parameters can be set through BCI communication interface

● Potential-free signal contacts with protective insulation

● Low voltage monitoring

● Operating voltage: AC 230V, -15%/+10%

                                 AC 120V，-15%/+10%

● Power consumption 5VA

● Protection category I. According to DIN EN 60730-1: Protection category I for use without safety isolation devices. Prevent electrocution risk by double or 

   reinforced isolation. Connect the safety leads inside the socket AGK11.7.

   When replacing LAE10/LFE10 with KF8896 and LFS1, the maximum protection category I II can be achieved for use with safety isolation devices. Prevent the 

   risk of electric shock by double or reinforced isolation.

● IP40 degree of protection

● Software level Level C according to DIN EN 60730-2-5 2-channel construction 

● Flameout identification time max. 1 s for LFS1 (including flame detector)

● Flame-out reaction time max. 1 s for LFS1 with LEC1

● The minimum self-test frequency of the flame monitor is 2x per second for the continuous operation of the ion rod or RAR9

● Operating environment Operating standard EN 60721-3-3:1995 + A2:1997

                                          Climatic conditions Grade 3K5

                                          Mechanical Condition Class 3M2

                                          Temperature range -20...+60°C

                                          Humidity <95%r.F.

● Service life: 250,000 starts in normal operation mode.